Cpu 31xc And Cpu 31x Technical Specifications-Books Pdf

CPU 31xC and CPU 31x Technical specifications
23 Sep 2020 | 0 views | 0 downloads | 420 Pages | 3.69 MB

Share Pdf : Cpu 31xc And Cpu 31x Technical Specifications

Download and Preview : Cpu 31xc And Cpu 31x Technical Specifications

Report CopyRight/DMCA Form For : Cpu 31xc And Cpu 31x Technical Specifications



Transcription

Legal information, Legal information, Warning notice system. This manual contains notices you have to observe in order to ensure your personal safety as well as to prevent. damage to property The notices referring to your personal safety are highlighted in the manual by a safety alert. symbol notices referring only to property damage have no safety alert symbol These notices shown below are. graded according to the degree of danger, indicates that death or severe personal injury will result if proper precautions are not taken. indicates that death or severe personal injury may result if proper precautions are not taken. with a safety alert symbol indicates that minor personal injury can result if proper precautions are not taken. without a safety alert symbol indicates that property damage can result if proper precautions are not taken. indicates that an unintended result or situation can occur if the corresponding information is not taken into. If more than one degree of danger is present the warning notice representing the highest degree of danger will. be used A notice warning of injury to persons with a safety alert symbol may also include a warning relating to. property damage, Qualified Personnel, The product system described in this documentation may be operated only by personnel qualified for the specific. task in accordance with the relevant documentation for the specific task in particular its warning notices and. safety instructions Qualified personnel are those who based on their training and experience are capable of. identifying risks and avoiding potential hazards when working with these products systems. Proper use of Siemens products, Note the following. Siemens products may only be used for the applications described in the catalog and in the relevant technical. documentation If products and components from other manufacturers are used these must be recommended. or approved by Siemens Proper transport storage installation assembly commissioning operation and. maintenance are required to ensure that the products operate safely and without any problems The permissible. ambient conditions must be adhered to The information in the relevant documentation must be observed. Trademarks, All names identified by are registered trademarks of the Siemens AG The remaining trademarks in this.
publication may be trademarks whose use by third parties for their own purposes could violate the rights of the. Disclaimer of Liability, We have reviewed the contents of this publication to ensure consistency with the hardware and software. described Since variance cannot be precluded entirely we cannot guarantee full consistency However the. information in this publication is reviewed regularly and any necessary corrections are included in subsequent. Siemens AG A5E00105475 12 Copyright Siemens AG 2011. Industry Sector 04 2011 Technical data subject to change. Postfach 48 48, 90026 N RNBERG, Purpose of this manual. This manual contains essential information about the following. Installation, Communication, Memory concept, Cycle and response times. Technical specifications of the CPUs, Basic knowledge required. In order to understand this manual you require a general knowledge of automation. engineering, You require knowledge of STEP 7 basic software.
The name CPU 31xC summarizes all compact CPUs as table below shows. CPU Convention Order number As of firmware version. CPU designations, CPU 312C CPU 31xC 6ES7312 5BF04 0AB0 V3 3. CPU 313C 6ES7313 5BG04 0AB0 V3 3, CPU 313C 2 PtP 6ES7313 6BG04 0AB0 V3 3. CPU 313C 2 DP 6ES7313 6CG04 0AB0 V3 3, CPU 314C 2 PtP 6ES7314 6BH04 0AB0 V3 3. CPU 314C 2 DP 6ES7314 6CH04 0AB0 V3 3, CPU 314C 2 PN DP 6ES7314 6EH04 0AB0 V3 3. CPU 31xC and CPU 31x Technical specifications, Manual 03 2011 A5E00105475 12 3.
The name CPU 31x summarizes all standard CPUs as table below shows. CPU Convention Order number As of firmware version. CPU designations, CPU 312 CPU 31x 6ES7312 1AE14 0AB0 V3 3. CPU 314 6ES7314 1AG14 0AB0 V3 3, CPU 315 2 DP 6ES7315 2AH14 0AB0 V3 3. CPU 315 2 PN DP 6ES7315 2EH14 0AB0 V3 2, CPU 317 2 DP 6ES7317 2AK14 0AB0 V3 3. CPU 317 2 PN DP 6ES7317 2EK14 0AB0 V3 2, CPU 319 3 PN DP 6ES7318 3EL01 0AB0 V3 2. All CPUs with PROFINET properties are grouped under the designation CPU 31x PN DP as. the following table shows, CPU Convention Order number As of firmware version.
CPU designations, CPU 314C 2 PN DP CPU 31x PN DP 6ES7314 6EH04 0AB0 V3 3. CPU 315 2 PN DP 6ES7315 2EH14 0AB0 V3 2, CPU 317 2 PN DP 6ES7317 2EK14 0AB0 V3 2. CPU 319 3 PN DP 6ES7318 3EL01 0AB0 V3 2, A description of the special features of the failsafe CPUs of the S7 product range is available. in the product information at the following Internet address. http support automation siemens com WW view en 11669702 133300. We reserve the right to include a product Information containing the latest information on. new modules or modules of a more recent version, CPU 31xC and CPU 31x Technical specifications. 4 Manual 03 2011 A5E00105475 12, Changes in comparison to the previous version.
The following table contains changes from the previous versions of the following. documentation from the S7 300 documentation package. Technical specifications manual version 06 2010, Operating instructions for installation version 06 2010. The CPU 314C 2 PN DP has been added in delivery stage V3 3 It has the same. functionalities as the CPU 314C 2 DP and also has PROFINET functionalities such as those. of the CPU 315 2 PN DP, In delivery stage V3 3 the functionality and performance of all C CPUs and the CPU 317 2. DP were improved compared to their predecessor versions. Additional information was taken from the chapter Information on converting to a CPU 31xC. or CPU 31x If you required more information however please refer to the FAQs on the. CPU 312 312C 313C 313C 2 313C 2 314 314C 2 314C 2 315 2 317 2. DP PtP DP PtP DP DP, Encryption of blocks X X X X X X X X X X. using S7 Block, Integration of a X1 2 X2 X2 X2 X2 X1 2 X2 X2 X1 2 X2. maintenance LED, Configurable X X, increase of control.
and monitoring, performance, Improved operational X X X. limits for PT100, Analog input, Data set routing X X X1 X. Configurable process X 1 X X X X X 1 X X X 1 X, Expansion of the X1 X X X X X1 X X X1 X. block number range, Number of displayed X1 X X X X X1 X X X1 X. diagnostic buffer, entries can be, configured in CPU.
Reading out the X1 X X X X X1 X X X1 X, service data. Extension of SFC 12 X X X1 X, with 2 new modes to, trigger the OB 86. enabling disabling, Copying of 512 bytes X 1 X X X X X1 X X X1 X. with SFC 81, CPU 31xC and CPU 31x Technical specifications. Manual 03 2011 A5E00105475 12 5, CPU 312 312C 313C 313C 2 313C 2 314 314C 2 314C 2 315 2 317 2.
DP PtP DP PtP DP DP, Main memory X1 X X X X X1 X X X1 X. Performance through X 1 X X X X X 1 X X X 1 X, shorter command. processing times, Status information X1 X X X X X1 X X X1 X. that can be, monitored by the, status block in, STEP 7 V5 5 or. Number of blocks X1 X X X X X1 X X X1 X, that can be.
monitored by the, status block, from 1 to 2, Number of X1 X X X X X1 X X X1 X. breakpoints from 2 to, Local data stack X1 X X X X X1 X X X1 X. Number of block X1 X X X X X1 X X X1 X, related messages. Alarm S is, uniformly limited to, Number of the bit X1 X. memories timers, and counters, Standardization, DB sizes Max X1 3 X X X X X1 X X X1 X1.
Watchdog interrupts X1 X X X X X1 X X X1 X1, OB 32 to OB 35. Global data X1 X X X X X1 X X X1 X1, communication of 8. GD circles, System function blocks for integrated technology functions. SFB 41 to 43 X1 X1 X1 X1 X1, SFB 44 and 46 X1 X1, SFB 47 to 49 X 1 X 1 X 1 X 1 X 1 X 1. SFB 60 to 62 X 1 X 1, SFB 63 to 65 X1, 1 This function was already made available to the CPU in an earlier version.
2 Available but without function, 3 Max DB size 32 KB. CPU 31xC and CPU 31x Technical specifications, 6 Manual 03 2011 A5E00105475 12. Standards and certifications, For information about standards and approvals see the section General technical. specifications Page 201, Recycling and disposal, Because they have ecologically compatible components the devices described in this. manual can be recycled For environment friendly recycling and disposal of your old. equipment contact a certified disposal facility for electronic scrap. Service Support on the Internet, In addition to our documentation we offer a comprehensive knowledge base online on the.
Internet http www siemens com automation service support. There you will find, Our newsletter containing up to date information on your products. The latest documents in the Siemens Service Support. http www siemens com automation service support search engine. A forum for global information exchange by users and specialists. Your local representative for automation and drives in our contact database. Information about on site services repairs spare parts and lots more. Applications and tools for the optimized use of the SIMATIC S7 For example Siemens. also publishes DP and PN performance measurements on the Internet. http www siemens com automation pd, CPU 31xC and CPU 31x Technical specifications. Manual 03 2011 A5E00105475 12 7, CPU 31xC and CPU 31x Technical specifications. 8 Manual 03 2011 A5E00105475 12, Table of contents. 1 Guide to the S7 300 documentation 13, 1 1 Documentation classification 13.
1 2 Guide to the S7 300 documentation 18, 2 Operator controls and indicators 21. 2 1 Operator controls and indicators of the compact CPUs CPU 31xC 21. 2 1 1 Operator controls and indicators CPU 312C 21. 2 1 2 Operator controls and indicators CPU 313C 24. 2 1 3 Operator controls and indicators CPU 313C 2 PtP 27. 2 1 4 Operator controls and indicators CPU 313C 2 DP 30. 2 1 5 Operator controls and indicators CPU 314C 2 PtP 33. 2 1 6 Operator controls and indicators CPU 314C 2 DP 37. 2 1 7 Operator controls and indicators CPU 314C 2 PN DP 41. 2 2 Operator controls and indicators of the standard CPUs CPU 31x 45. 2 2 1 Operator controls and indicators CPU 312 and CPU 314 45. 2 2 2 Operator controls and indicators CPU 315 2 DP and CPU 317 2 DP 47. 2 2 3 Operator controls and indicators CPU 315 2 PN DP and CPU 317 2 PN DP 50. 2 2 4 Operator controls and indicators CPU 319 3 PN DP 52. 3 Communication 57, 3 1 Interfaces 57, 3 1 1 Multi Point Interface MPI 57. 3 1 2 PROFIBUS DP 58, 3 1 3 PROFINET 59, 3 1 3 1 Configuring the port properties 63. 3 1 4 Point to point PtP 64, 3 2 Communication services 65. 3 2 1 Overview of communication services 65, 3 2 2 PG communication 67.
3 2 3 OP communication 68, 3 2 4 S7 basic communication 68. 3 2 5 S7 communication 69, 3 2 6 Global data communication MPI only 70. 3 2 7 Routing 71, 3 2 8 Data record routing 75, 3 2 9 Clock synchronization 77. 3 2 10 Point to point connection 79, 3 2 11 Data consistency 79. 3 3 SNMP communication service 80, 3 4 Open communication via Industrial Ethernet 81.
CPU 31xC and CPU 31x Technical specifications, Manual 03 2011 A5E00105475 12 9. Table of contents, 3 5 S7 connections 84, 3 5 1 S7 connection as communication path 84. 3 5 2 Allocation of S7 connections 85, 3 5 3 Distribution and availability of S7 connection resources 87. 3 5 4 Connection resources for routing 89, 3 6 DPV1 91. 3 7 Web server 93, 3 7 1 Language settings 95, 3 7 2 Settings in HW Config Web tab 97.
3 7 3 Updating and storing information 100, 3 7 4 Web pages 101. 3 7 4 1 Start page with general CPU information 101. 3 7 4 2 Identification 103, 3 7 4 3 Diagnostic buffer 104. 3 7 4 4 Module information 106, 3 7 4 5 Messages 113. 3 7 4 6 Communication 114, 3 7 4 7 Topology 120, 3 7 4 8 Status of the variables 127. 3 7 4 9 Variable tables 128, 3 7 4 10 User pages 131.
4 PROFINET 135, 4 1 Communication via PROFINET 135. 4 1 1 Introduction 135, 4 1 2 PROFINET IO System 138. 4 1 3 Blocks for PROFINET IO 140, 4 2 Isochronous real time communication 143. 4 3 Prioritized startup 144, 4 4 Device replacement without removable medium programming device 145. 4 5 IO devices changing at runtime 145, 4 6 Isochronous mode 146.
4 7 I Device 146, 4 8 Shared Device 147, 4 9 Media redundancy 148. 5 Memory concept 149, 5 1 Memory areas and retentivity 149. 5 1 1 CPU memory areas 149, 5 1 2 Retentivity of load memory system memory and main memory 150. 5 1 3 Retentivity of memory objects 151, 5 1 4 Address areas of the system memory 153. 5 1 5 Properties of the SIMATIC Micro Memory Card 158. CPU 31xC and CPU 31x Technical specifications, 10 Manual 03 2011 A5E00105475 12.
Table of contents, 5 2 Memory functions 159, 5 2 1 General Memory functions 159. 5 2 2 Download of the user program to the SIMATIC Micro Memory Card in the CPU 160. 5 2 3 Handling with blocks 161, 5 2 3 1 Encryption of blocks 161. 5 2 3 2 Reloading or transferring blocks 162, 5 2 3 3 Uploading blocks 163. 5 2 3 4 Deleting blocks 163, 5 2 3 5 Compressing blocks 163. 5 2 3 6 Promming RAM to ROM 163, 5 2 4 Memory reset and restart 164.
5 2 5 Recipes 165, 5 2 6 Measured value log files 167. 5 2 7 Backup of project data to SIMATIC Micro Memory Card 169. 6 Cycle and response times 171, 6 1 Overview 171, 6 2 Cycle time 172. CPU 31xC and CPU 31x Technical specifications Manual 03 2011 A5E00105475 12 5 Changes in comparison to the previous version The following table contains changes from the previous versions of the following documentation from the S7 300 documentation package Technical specifications manual version 06 2010 Operating instructions for installation version 06 2010 The CPU 314C 2 PN DP has

Related Books

ThinkPad T510 T510i and W510 Hardware Maintenance Manual

ThinkPad T510 T510i and W510 Hardware Maintenance Manual

4 ThinkPad T510 T510i and W510 Hardware Maintenance Manual Safety inspection guide The purpose of this inspection guide is to assist you in identifying potentially

ThinkPad T410s T410 T510 et W510 Guide de maintenance et

ThinkPad T410s T410 T510 et W510 Guide de maintenance et

x ThinkPad T410s T410 T510 et W510 Guide de maintenance et d identification des incidents que vous n avez pas obtenu d instructions aupr s du fabricant ou que vous n avez pas obtenu de pi ce de rechange

PRODUCT NEWS SHEET N 7652 DATE JOHN DEERE

PRODUCT NEWS SHEET N 7652 DATE JOHN DEERE

Nos pi ces ne sont pas d origine THE RELIABLE SERVICE PRODUCT NEWS SHEET JOHN DEERE Rotules amp tirants de direction Steering links amp sockets Stuurkogels en stangen Kugelgelenke und Spurstangen R tulas y acoples de direcci n DIRECTION HYDROSTATIQUE 2 ROUES MOTRICES 2 WHEEL DRIVE HYDROSTATIC STEERING 6010 6010SE 6020 6020SE 6100 6100SE 6110 EU 6110 USA 6110L

PRODUCT SUPPORT CATALOG John Deere

PRODUCT SUPPORT CATALOG John Deere

Offer ends October 31 2019 Subject to approved credit on PowerPlan a service of John Deere Financial f s b Available at participating dealers Some restrictions apply Repairs must be made to John Deere equipment using John Deere OEM parts Prior purchases are not eligible After promotional period interest charges will begin to accrue

Harry Potter et les reliques de la mort

Harry Potter et les reliques de la mort

Rogue et Yaxley s attard rent un moment sur le seuil de la porte Tandis qu ils s habituaient la faible lumi re un tr s trange spectacle attira leur regard une silhouette humaine apparemment inconsciente tait suspendue au dessus de la table la t te en bas et tournait lentement sur elle m me comme si elle avait t accroch e par les pieds une corde invisible son

CUISINEZ DI REMMENT OPTEZ POUR UN ROGUE

CUISINEZ DI REMMENT OPTEZ POUR UN ROGUE

CHOISISSEZ ROGUE Des marques de grillage parfaites sont pour vous une marque d honneur Vous pensez que couper un steak pour en v rifier la cuisson est un sacril ge Vous savez quand et comment utiliser sauces marinades et m langes d pices Alors vous tes pr t pour un gril Napol on Napol on apporte une nouvelle dimension l art de griller Chaque caract ristique et chaque

ROGUE RSE425RSIB Napoleon

ROGUE RSE425RSIB Napoleon

PG 19 N415 0576CE FR OCt 31 19 wwwnaplencm APPOSEZ L TIQUETTE DU NUMERO DE SERIE DU CARTON NO de s rie XXXXXX000000 NO DE MOD LE Ce gril doit tre utilis uniquement l ext rieur dans un endroit bien a r et ne doit jamais tre utilis l int rieur d un

ROGUE RXT365 RXT425 Napoleon

ROGUE RXT365 RXT425 Napoleon

PG 20 N415 0578CE FR MaR 24 20 wwweom APPOSEZ L TIQUETTE DU NUMERO DE SERIE DU CARTON NO de s rie XXXXXX000000 NO DE MOD LE Ce gril doit tre utilis uniquement l ext rieur dans un endroit bien a r et ne doit jamais tre

SCHEMI OPERATIVI Redatti dal Commissario Aggiunto Gianni

SCHEMI OPERATIVI Redatti dal Commissario Aggiunto Gianni

Viene redatto apposito verbale di sequestro amministrativo La procedura del fermo amministrativo a seguito di reato del codice della strada nonostante si applicano le disposizioni di cui all art 214 si differenzia dal fermo amministrativo a seguito di violazioni di norme del C d S in quanto si procede con il FERMO AMM VO PROVVISORIO di 30gg che va espressamente indicato nel

Circolazione dei veicoli esteri ed applicazione del fermo

Circolazione dei veicoli esteri ed applicazione del fermo

verbale della violazione dovr essere inviato alla Prefettura del luogo dove stata contestata l infrazione Con la precipua finalit di contrastare pi efficacemente il diffuso abusivismo nel settore dell autotrasporto internazionale di merci commesso da veicoli immatricolati all estero l art 52 comma 1 lett b della legge 29 luglio 2010 n 120 ha modificato l art 60