Configuration Manual 1ph7 Induction Motors For Machine Tools-Books Pdf

Configuration Manual 1PH7 Induction Motors for Machine Tools
24 Sep 2020 | 0 views | 0 downloads | 244 Pages | 6.56 MB

Share Pdf : Configuration Manual 1ph7 Induction Motors For Machine Tools

Download and Preview : Configuration Manual 1ph7 Induction Motors For Machine Tools

Report CopyRight/DMCA Form For : Configuration Manual 1ph7 Induction Motors For Machine Tools



Transcription

Motor description, Configuration, SINAMICS S Mechanical properties of the. Technical data and, 1PH7 induction motors, characteristics. Machine tools, Motor components options, Configuration Manual. Connection system, Information for using the, APH7W 04 2009. 6SN1197 0AD72 0BP0, Legal information, Warning notice system.
This manual contains notices you have to observe in order to ensure your personal safety as well as to prevent. damage to property The notices referring to your personal safety are highlighted in the manual by a safety alert. symbol notices referring only to property damage have no safety alert symbol These notices shown below are. graded according to the degree of danger, indicates that death or severe personal injury will result if proper precautions are not taken. indicates that death or severe personal injury may result if proper precautions are not taken. with a safety alert symbol indicates that minor personal injury can result if proper precautions are not taken. without a safety alert symbol indicates that property damage can result if proper precautions are not taken. indicates that an unintended result or situation can occur if the corresponding information is not taken into. If more than one degree of danger is present the warning notice representing the highest degree of danger will. be used A notice warning of injury to persons with a safety alert symbol may also include a warning relating to. property damage, Qualified Personnel, The device system may only be set up and used in conjunction with this documentation Commissioning and. operation of a device system may only be performed by qualified personnel Within the context of the safety notes. in this documentation qualified persons are defined as persons who are authorized to commission ground and. label devices systems and circuits in accordance with established safety practices and standards. Proper use of Siemens products, Note the following. Siemens products may only be used for the applications described in the catalog and in the relevant technical. documentation If products and components from other manufacturers are used these must be recommended. or approved by Siemens Proper transport storage installation assembly commissioning operation and. maintenance are required to ensure that the products operate safely and without any problems The permissible. ambient conditions must be adhered to The information in the relevant documentation must be observed. Trademarks, All names identified by are registered trademarks of the Siemens AG The remaining trademarks in this. publication may be trademarks whose use by third parties for their own purposes could violate the rights of the. Disclaimer of Liability, We have reviewed the contents of this publication to ensure consistency with the hardware and software.
described Since variance cannot be precluded entirely we cannot guarantee full consistency However the. information in this publication is reviewed regularly and any necessary corrections are included in subsequent. Siemens AG Order number 6SN1197 0AD72 0BP0 Copyright Siemens AG 2009. Industry Sector 04 2009 Technical data subject to change. Postfach 48 48, 90026 N RNBERG, Information on the documentation. At http www siemens com motioncontrol docu information is available on the following. Ordering documentation, Here you can find an up to date overview of publications. Downloading documentation, Links to more information for downloading files from Service Support. Researching documentation online, Information on DOConCD and direct access to the publications in DOConWeb. Compiling documentation individually on the basis of Siemens content with the. My Documentation Manager MDM see http www siemens com mdm. The My Documentation Manager offers you a range of features for creating your own. machine documentation, Training and FAQs, Information on the range of training courses and FAQs frequently asked questions are.
available via the page navigation, Target group, Planners and project engineers. The Configuration Manual supports you when selecting motors calculating the drive. components selecting the required accessories as well as when selecting line and motor. side power options, Standard scope, The scope of the functionality described in this document can differ from the scope of the. functionality of the drive system that is actually supplied Other functions not described in this. documentation might be able to be executed in the drive system This does not however. represent an obligation to supply such functions with a new control or when servicing. Extensions or changes made by the machine manufacturer are documented by the machine. manufacturer, For the sake of simplicity this documentation does not contain all detailed information about. all types of the product and cannot cover every conceivable case of installation operation or. maintenance, 1PH7 induction motors Machine tools, Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0 5. Technical Support, If you have any technical questions please contact our hotline.
Europe Africa, Phone 49 180 5050 222, Fax 49 180 5050 223. 0 14 min from German landlines mobile call charges may differ. Internet http www siemens com automation support request. Telephone 1 423 262 2522, Fax 1 423 262 2200, E mail mailto techsupport sea siemens com. Asia Pacific, Telephone 86 1064 757 575, Fax 86 1064 747 474. E Mail mailto support asia automation siemens com, For technical support telephone numbers for different countries go to. http www automation siemens com partner, Questions about this documentation.
Please send any questions about the technical documentation e g suggestions. corrections to the following fax number or e mail address. Fax 49 0 9131 98 2176, E mail mailto docu motioncontrol siemens com. A fax form is available in the appendix of this document. Information on the product, http www siemens com sinamics. 1PH7 induction motors Machine tools, 6 Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0. EC Declarations of Conformity, The EC Declaration of Conformity for the EMC Directive can be found obtained. in the Internet, http support automation siemens com under entry ID 22383669 or.
with the responsible local Siemens office, Danger and warning information. Commissioning is absolutely prohibited until it has been completely ensured that the. machine in which the components described here are to be installed is in full compliance. with the provisions of the EC Machinery Directive, Only appropriately qualified personnel may commission the SINAMICS units and the. These personnel must carefully observe the technical customer documentation associated. with this product and be have knowledge of and carefully observe the danger and warning. Operational electrical equipment and motors have parts and components which are at. hazardous voltage levels All of the work carried out on the electrical machine or system. must be carried out with it in a no voltage condition. When the machine or system is operated hazardous axis movements can occur. SINAMICS devices with synchronous motors may only be connected to the power supply. via residual current protective devices if it has been verified in accordance with EN 50178. Section 5 2 11 2 that the device is compatible with the residual current protective device. In combination with the drive system the motors are generally approved for operation on. TN and TT systems with grounded neutral and on IT systems. In operation on IT systems the occurrence of a first fault between an active part and. ground must be signaled by a monitoring device In accordance with IEC 60364 4 41 it is. recommended that the first fault be eliminated as quickly as is practically possible. In systems with a grounded external conductor an isolating transformer with grounded. neutral secondary side must be connected between the supply and the drive system to. protect the motor insulation from excessive stress The majority of TT systems have a. grounded phase conductor so in this case an isolating transformer must be used. 1PH7 induction motors Machine tools, Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0 7. The successful and safe operation of this equipment and motors is dependent on. professional transport storage installation and mounting as well as careful operator. control service and maintenance, For special versions of the drive units and motors information and data in the catalogs and. quotations additionally apply, In addition to the danger and warning information instructions in the technical customer.
documentation supplied the applicable domestic local and plant specific regulations and. requirements must be carefully taken into account, The motors can have surface temperatures of over 80 C. This is the reason that temperature sensitive components e g cables or electronic. components may neither be in contact nor be attached to the motor. When connecting up cables please observe that they. are not damaged, are not subject to tensile stress. cannot be touched by rotating components, Motors should be connected in accordance with the operating instructions They must not. be connected directly to the three phase supply because this will damage them. SINAMICS units and motors are subjected to a voltage test during routine testing It is not. permitted to perform an additional high voltage test on the motor such a test can destroy. electronic components such as the temperature sensor or encoder. The DRIVE CLiQ interface contains motor and encoder specific data as well as an. electronic rating plate This is the reason that this Sensor Module may only be operated on. the original motor and may not be mounted onto other motors or replaced by a Sensor. Module from other motors, The DRIVE CLiQ interface has direct contact to components that can be. damaged destroyed by electrostatic discharge ESDS Neither hands nor tools that could. be electrostatically charged should come into contact with the connections. When operational and in dry operating rooms SINAMICS units with motors fulfill the Low. Voltage Directive, In the configurations specified in the associated EC Declaration of Conformity SINAMICS.
units with motors fulfill the EMC Directive, 1PH7 induction motors Machine tools. 8 Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0. ESDS instructions and electromagnetic fields, An electrostatic sensitive device ESDS is an individual component integrated circuit or. module that can be damaged by electrostatic fields or discharges. ESDS regulations for handling boards and equipment. When handling components that can be destroyed by electrostatic discharge it must be. ensured that personnel the workstation and packaging are well grounded. Personnel in ESD zones with conductive floors may only touch electronic components if. grounded through an ESDS bracelet and, wearing ESDS shoes or ESDS shoe grounding strips. Electronic boards may only be touched when absolutely necessary. Electronic boards may not be brought into contact with plastics and articles of clothing. manufactured from man made fibers, Electronic boards may only be placed on conductive surfaces table with ESDS surface. conductive ESDS foam rubber ESDS packing bag ESDS transport containers. Electronic boards may not be brought close to data terminals monitors or television sets. Minimum clearance to screens 10 cm, Measurements may only be carried out on electronic boards and modules if.
the measuring instrument is grounded e g via a protective conductor or. before making measurements with a potential free measuring device the measuring head. is briefly discharged e g by touching an unpainted blank piece of metal on the control. It may be dangerous for people to remain in the immediate proximity of the product. especially for those with pacemakers implants or similar due to electric magnetic and. electromagnetic fields EMF occurring as a consequence of operation. The machine system operator and the people present near the product must observe the. relevant guidelines and standards These are for example in the European Economic Area. EEA the Electromagnetic Fields Directive 2004 40 EC and the standards EN 12198 1 to. 12198 3 and in the Federal Republic of Germany the Employer s Liability Insurance. Association Regulations for the Prevention of Industrial Accidents BGV 11 with the relevant. rule BGR 11 Electromagnetic Fields, Then a risk assessment must be carried out for every workplace activities for reducing. dangers and exposure for people decided upon and implemented as well as determining. and observing exposure and danger areas, 1PH7 induction motors Machine tools. Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0 9. Information regarding third party products, This document contains recommendations relating to third party products This involves. third party products whose fundamental suitability is familiar to us It goes without saying. that equivalent products from other manufacturers may be used Our recommendations are. to be seen as helpful information not as requirements or regulations We cannot accept. any liability for the quality and properties features of third party products. Environmental compatibility, Environmental aspects during development. When selecting supplier parts environmental compatibility was an essential criteria. 1PH7 induction motors Machine tools Configuration Manual APH7W 04 2009 6SN1197 0AD72 0BP0 9 ESDS instructions and electromagnetic fields CAUTION An electrostatic sensitive device ESDS is an individual component integrated circuit or module that can be damaged by electrostatic fields or discharges

Related Books

We Would Not Have Come Without You Generations of Nostalgia

We Would Not Have Come Without You Generations of Nostalgia

We Would Not Have Come Without You Generations of Nostalgia Czernovitz expelled its Jews and so did Vienna Prague Budapest and Lemberg Now these cities live without Jews and their few descendants scattered through the world carry memory like a wonderful gift and a relent less curse For me too the childhood home is that

panduan praktis Pelayanan Kesehatan

panduan praktis Pelayanan Kesehatan

Januari 2014 BPJS Kesehatan sebagai Badan Pelaksana merupakan badan hukum publik yang dibentuk untuk menyelenggarakan program jaminan kesehatan bagi seluruh rakyat Indonesia Tujuan diberlakukannya program Jaminan Kesehatan Nasional ini adalah untuk memenuhi kebutuhan kesehatan masyarakat yang layak yang diberikan kepada setiap orang yang telah membayar iuran atau iurannya dibayar oleh

Family Tree Maker2012

Family Tree Maker2012

Family Tree The Master Genealogist You can personalize your charts and make them more appealing by adding family photo graphs borders and embellishments and text You can add images from your computer pic tures in the Media Collection or use the borders and images included in Family Tree Maker CREATE FAMILY TREE CHARTS Another new addition is the family tree chart The primary

Using the FamilySearch Family Tree A Reference Guide 18

Using the FamilySearch Family Tree A Reference Guide 18

Family Tree is an updated approach to organizing and preserving your genealogy online Family Tree is free available to everyone and provides an easy way to share information compare research and go further faster by working together In Family Tree you can See what the system already contains about your ancestors

helen keller Neshaminy School District

helen keller Neshaminy School District

Page 1 Read the article about Helen Keller Page 2 Complete the Synonym and Phrase Match Page 3 Fill in the Blank Page 4 Put the Text Back Together Page 5 Writing About Helen Keller using the RACE strategy

Helen Keller Girl Scouts

Helen Keller Girl Scouts

When Helen Keller was young she became very sick and her illness left her both deaf and blind Growing up was hard for Helen until she met Anne Sullivan a teacher that taught her how to communicate Helen became a very famous speaker and author who made it her life mission to help others who were hearing and visually impaired Complete 3 Daisy 4 Brownie 5 Junior 6 Cadette and 7 Senior

The Amazing Helen Keller LibrarySparks

The Amazing Helen Keller LibrarySparks

7 Add the H and complete this sentence People were impressed when they about Helen s achievements and how she was able to overcome her disabilities Helen Keller Web Resource Library Lessons Aug Sept 2015 LibrarySparks A D E H I R T W nonfICtIon Lesson 1 ACtIVIty Spell It Script 1 Select four letters to make a word that completes this sentence When Helen Keller was

Universit de Montr a Le diable et les d mons dans la

Universit de Montr a Le diable et les d mons dans la

hagiography demonology Middle Ages 111 Table des mati res Introduction I Chapitre I Jacques de Voragine et sa Legeiida 3 1 Esquisse biographique 3 A Origines et milieu de Jacques de Voragine 4 B Son entr e chez les Dominicains et les ann es de formation 7 C Une carri re remarquable 13 D L activit litt raire de Jacques de Voragine 16 2 La Legeiida aurea 1 A Les ant c dents de

The Complete Book of WordPress com

The Complete Book of WordPress com

The Complete Book of Demonolatry Magic by J Thorp DB Publishing United States of America DB Publishing is an imprint of Darkerwood Publishing Group PO Box 2011 Arvada CO 80001 Contact the publisher for bulk purchases and discounts or contact ofs admin gmail com for online wholesale purchase links Parts of this book were first published as Walking the Hidden Path A Book of Demonic

Document d Eglise d monologie sosparanormal Accueil

Document d Eglise d monologie sosparanormal Accueil

Mais cette vision est elle compl te Est elle exacte Sommes nous insensibles aux d ficiences qui existent dans le monde aux choses qui ne vont pas dans notre existence la souffrance la mort la m chancet la cruaut au p ch bref au mal Ne voyons nous pas tout le mal qui existe dans le monde sp cialement le mal moral c est dire celui qui est commis

D MONOLOGIE LE CONFLIT DES POUVOIR

D MONOLOGIE LE CONFLIT DES POUVOIR

moins compl te de la personnalit Le contr le de la vie a chapp au moi les forces anonymes de l inconscient sont devenues ma tresses de l homme qu elles tirent hue et dia comme le relatent de fa on la fois sinistre et pittoresque les r cits vang liques Mais que veut dire expliquer Il est impensable nous l avons affirm de rejeter purement et